Non Conforming Illegal Hi Cor Roketto D1 Golf

This is for a 10.5* Driver New Model 46" total Driver length SAT2041 Titanium high rebound face Roketto D1 460cc Model 10.5* 2.5mm constant cup face thickness Nonconforming drivers with SAT-2041 Japan material are selling for 500.00 Dollars and up. Not many golf manufactures will use this face material due to its cost. COR values are at around .880 + or - .01 Will be shafted with a Fujikura Pro 63vSeniors flex. Shafts will be spine aligned total Driver length will be 46" unless you request another length. We believe to get the most out of your Driver you must have a good shaft installed. No Head Cover. All Roketto Golf Drivers come with a one year warranty against manufacture defects. Will have Standard Grip installed. Roketto D1 Head Specs. Loft 10.5°/9.5° Lie  58° Face angle -0.5° Finish weight 198g bulge & roll: 12*12 Item specifics Fujikura Pro 63 Seniors Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read more about the condition Brand Fujikura Flex Senior Model PRO 63 Item Weight 65 g MPN Does Not Apply Tip Diameter 0.335 Torque 4.2* Launch Mid Kickpoint Mid Spin Mid Condition Notes New Gender Men's Sport/Activity Golf SAT2041 TI Face material is used on just a few golf drivers manufactures some of these drivers are listed below. 1.  Romaro Ray 460HX Gold Driver 2.  George Spirits Reoness USGA Legal golf drivers has a sweet spot face thickness of 3.3MM to 3.2MM and side areas of the face at around 2.8MM to 2.6MM as you can see Roketto Tadakatsu has a sweet spot of 2.5mm and this is around the entire face which is called a constant face thickness the bottom line the thinner the sweet spot the more spring effect on contact of the ball resulting in more distance. The USGA would not have these guide lines on the COR values and face thickness if it weren't true. Please take the time and look at some of our other Drivers.

Returns Accepted for this item if it's within 30 Days